EXPERTS IN FASTENERS AND WELDING SOLUTIONS when everything fits

Structural bolts

Per page:

EN 14399-4 10.9 HV SET BL

Set of high-strength structural bolts for preloading, HR system with CE marking, black finish and quality 10.9

EN 14399-4 10.9 HV SET ZP

Set of high-strength structural bolts for preloading, HR system with CE marking, zinc plated finish and quality 10.9

EN 14399-4 10.9 HV SET HDG

Set of high-strength structural bolts for preloading, HR system with CE marking, hot-dip galvanised finish and quality 10.9

EN 15048 8.8 ZP – SET 4014+4032

(ISO 4014 ZN + ISO 4032 ZN) Non preloaded structural bolting assemblies with CE-certified, zinc-plated finish and quality 8.8

EN 15048 8.8 HDG – SET 4014+4032

(ISO 4014 ZN + ISO 4032 ZN) Non preloaded structural bolting assemblies with CE-certified, hot-dip galvanized and quality 8.8

EN 15048 8.8 ZP – SET 4017+4032

(ISO 4017 ZN + ISO 4032 ZN) Non preloaded structural bolting assemblies with CE-certified, zinc plated finish and quality 8.8

EN 15048 8.8 HDG – SET 4017+4032

(ISO 4017 ZN + ISO 4032 ZN) Non preloaded structural bolting assemblies with CE-certified, hot-dip galvanized finish and quality 8.8

Structural bolts or high-strength bolts are essential in the construction of metal structures, as they can withstand high loads and resist high vibrations. The high-strength hexagonal bolt is suitable for installation in metal structures, construction anchors, flange connections, electrical towers, bridges and industrial buildings.
Structural fastener sets

We have sets of structural fasteners under EN standard:

  • EN 14399-4: preload set used in high strength structural joints with HV system, quality 10.9 and class K1. It consists of bolt, nut and double washer, and is available in black, zinc-plated and hot-dip galvanised finish. The K 1 classification indicates the ability of the fasteners to be tightened using the torque control method or combined method via the k-factor. Its optimum application is for metal structures where tensile strength is of prime importance.
  • EN 15048: set used in structural connections without preload, consisting of bolt and nut, manufactured in quality 8.8 and available in zinc-plated and hot-dip galvanised coating. No controlled tightening is required; uniform hand tightening is sufficient. Its application is focused on shear-tensioned structures.

These two sets of structural fasteners are CE marked in accordance with the Construction Products Directive. The CE marking to EN 14399-4 and EN 15048 certifies the correct manufacture and compliance with safety requirements for the construction product sets.

Do you need more information?

CHAVES BILBAO, S.L. informs you that the personal data provided voluntarily on this website, the purpose, intended transfers and other circumstances of which are communicated when the personal data is collected, may, depending on the specific case, have any of the following purposes: responding to your request, complaint or question, maintaining the established relationship, the comprehensive and commercial management of customers, accounting and invoicing or sending of communications of news and activities related with CHAVES BILBAO, S.L., including by electronic means. The data included in our files is absolutely confidential and will be processed with the utmost confidentiality and in compliance with all the requirements set out in the General Data Protection Regulation (GDPR) of the 27th of April 2016. The data is registered in our files for the time necessary for the purpose for which it was collected. The period during which the personal data will be kept will be that established by current legislation and always during the period of the provision of the service for which it was provided. We do not recommend sending personal data that is classified as highly confidential by data protection legislation, such as that related to health, as it is not sent coded or encrypted. Therefore, if you send this type of data, it will be at your own risk. The user may at any time exercise their rights to access, rectify, oppose, cancel, limit processing or request its portability in accordance with the General Data Protection Regulation (GDPR) of the 27th of April 2016, sending a letter along with a photocopy of their DNI identity document, to CHAVES BILBAO, S.L. C/Bizkargi, 6 Polígono Industrial Sarrikola 48195 Larrabetzu - Bizkaia - Spain, or using the email address info@chavesbao.com.
Read more